Technical selection
Specifications and configuration
Reference — Peroxide Cured EPDM 900 series
| Parameter | Documented value / configuration |
|---|---|
| Hose construction | Peroxide-cured EPDM hose with high-strength textile reinforcement; this record is for un-terminated hose stock. |
| Maximum working pressure | 10 bar (150 psi)Conditions: subject: un-terminated hose; final assembly rating depends on selected ends and test scope |
| Temperature range | -40 to +100 °C |
| Listed inside diameters | 6.4, 9.5, 12.7, 16.0, 19.0 and 25.4 mm; six separate stock codesConditions: scope: series options, not dimensions of one photographed piece |
| Bend diameter options | 40 to 130 mm by listed stock codeConditions: scope: series range, select by exact stock code |
Manufacturer series reference. Confirm the exact order code, mating parts and stated conditions for the quoted configuration.
Overview
This is un-terminated liquid-cooling hose stock, not a finished hose assembly. It is useful when the buyer or assembler will control cut length, end fittings and installed routing.
Construction and interfaces
The documented hose uses peroxide-cured EPDM with textile reinforcement. The main photo shows a complete coil and open cut ends, correctly distinguishing it from a crimped or quick-connect assembly.
Selection
The maker lists six inner diameters from 6.4 to 25.4 mm; bend diameter also changes by stock code. Choose one code against required flow, bend envelope and compatible coolant.
Configuration options
Cut length and the final connectors are assembly-level inputs, not properties proven by the raw-hose photo. Record the exact hose code and fitting system before defining any finished assembly.
Application limits
The 10 bar and -40 to +100 °C values describe the documented hose stock. They do not independently rate a selected connector, crimp, assembled loop or unspecified coolant mixture.
