Technical selection
Specifications and configuration
Reference — 6.5 mm Press-In Check Valve
| Parameter | Documented value / configuration |
|---|---|
| Mounting configuration | Press-in cartridge for a plastic housing; metal-to-metal valve seat |
| Part diameter | 6.60 mm |
| Listed flow resistance | 75 Lohms |
| Listed component materials | 303 stainless body, 305 stainless cage, 302 stainless spring and 440C stainless ball; metal-to-metal seat |
| Example part cracking pressure | CCPI6510004S: 4 ± 3 kPa cracking-pressure example; no fixed series-wide settingConditions: scope: One listed part example; maximum pressure depends on housing and installation |
Manufacturer series reference. Confirm the exact order code, mating parts and stated conditions for the quoted configuration.
Overview
A metal-seat non-return cartridge for plastic-housing press-in installation where forward-flow resistance and compact geometry matter.
Construction and interfaces
The maker lists a 6.60 mm body diameter and metal-to-metal seat. The individual product photograph is not an elastomeric 'Zero Leak' variant.
Selection
Check bore geometry, housing retention, forward flow and acceptable reverse leakage. The 75-Lohm catalog value applies to the listed series reference, not the assembled loop.
Configuration options
Housing design and exact cracking-pressure option require the chosen order code and test conditions.
Application limits
A metal-to-metal seat should not be described as leak-free without an exact tested configuration; pressure rating also depends on the plastic housing.
