Technical selection
Specifications and configuration
Reference — AODSON manual clamp-end ball valve reference
| Parameter | Documented value / configuration |
|---|---|
| Valve configuration | Manual straight-through ball valve with two inline clamp ends and a long metal lever |
| Material options | 304 and 316 stainless steel are listed as material references; body, ball, stem and other wetted grades need separate confirmation |
| Connection reference | Supplier examples pair diameter 12.7 with 25 mm clamp ferrule and diameter 19 with 50.5 mm clamp ferrule; bore and ferrule profile require drawing review |
Manufacturer series reference. Confirm the exact order code, mating parts and stated conditions for the quoted configuration.
Local candidate reference. Documented values below belong to the stated manufacturer reference, not to an approved supply offer.
Component overview
This inline ball-valve configuration provides a different manual shutoff geometry from the clamp-end butterfly valve. The two ferrule ends and lever travel govern the installation envelope.
Construction and interfaces
The maker's image shows a cylindrical body, two clamp ferrules and a long metal lever. 304 and 316 stainless steel appear as references; the ball, stem and other wetted-component grades require confirmation.
Selection and documented data
Supplier examples pair diameter 12.7 with a 25 mm ferrule and diameter 19 with a 50.5 mm ferrule. Confirm what the diameter denotes and obtain a drawing of the actual flow passage and mating ferrule.
Standard and optional configuration
Specify end-to-end length, lever clearance, body and ball materials, seat and seal compounds, and the matching clamp hardware. The referenced three-section arrangement needs code-specific confirmation.
Application and evidence limits
Neither the photo nor ferrule diameter proves full-bore flow, a pressure rating, sanitary certification or suitability for a particular coolant. Do not treat excluded mating clamps and gaskets as supplied.
Define for quotation
Provide mating ferrule and pipe drawing, required bore, body/ball/seal materials, coolant and cleaning conditions, pressure and temperature, handle clearance, quantity and test requirements.
