Technical selection
Specifications and configuration
Reference — AODSON custom 304 stainless CDU pipe assembly example
| Parameter | Documented value / configuration |
|---|---|
| Assembly type | Drawing-defined CDU liquid-cooling pipe and loop assemblyConditions: scope: Photographed group is representative, not one fixed stocked geometry |
| Listed material | 304 stainless steel tubing with machined flange componentsConditions: scope: Listed for pictured examples; actual wetted BOM to follow approved drawing |
| Construction | Formed straight and curved tube sections with welded and machined flange interfacesConditions: scope: No fixed tube OD, wall, flange standard or finished pressure rating on the page |
| Configuration options | U-loops, return bends, offset spools, branches, manifold connections, equipment risers; project-specific end connectionsConditions: scope: Options are drawing-driven and not certified interchangeable standard models |
| Inspection options | Dimensional inspection, weld examination, pressure or leak testing, cleanliness verification and documentation as specifiedConditions: scope: Optional inspection scope requires project acceptance criteria; not a blanket completion claim |
Manufacturer series reference. Confirm the exact order code, mating parts and stated conditions for the quoted configuration.
Overview
This is a drawing-defined pipework purchasing category for CDU and secondary-loop connections. The official photo shows several representative fabricated parts, not one interchangeable stocked SKU.
Construction and interfaces
The supplier describes 304 stainless tube sections, formed bends, welded joints and machined flange interfaces. Tube wall, flange standard, weld specification and final wetted BOM follow the approved project drawing.
Selection
Select the circuit route, installation envelope, support points, coolant chemistry and flange mating pattern before ordering. Provide the operating flow and pressure condition to evaluate the actual geometry.
Configuration options
The manufacturer lists return bends, U-loops, offsets, branches and equipment risers as drawing-based forms. End connections, surface finish, cleaning and inspection scope may be specified per project.
Application limits
The illustrated set has no common tube OD, wall, overall dimensions or qualified pressure rating. Optional leak and cleanliness testing must be written into the acceptance plan; this page makes no blanket performance promise.
