Hose Assemblies
Configured hose assemblies with defined end connections and application requirements.
Explore rangeProduct group
Hose & Tube Assemblies
Routed hose and formed tube assemblies for equipment, rack, and secondary-loop connections.
Narrow your selection
Explore product families.
Tube Assemblies
Formed rigid or semi-rigid tube assemblies with controlled routing and end geometry.
Explore rangeComponent selection
All Product drafts
Private preview · candidate records
13 local draft records. Includes unfinished records and Family overviews. Draft · Noindex. Reference configurations are not approved stock. Image public-use review remains separate.
Show content-ready drafts
LCP-000024
Braided Metal Liquid Cooling Hose Assembly with Sanitary Ends — Penflex Reference
An individually pictured braided metal hose assembly with paired sanitary-style ends, supported by Penflex's data-center brochure for construction, configuration, cleaning and testing…
- Listed size range
- 1/4 to 24 inches
- Documented construction
- Braided metal flexible hose assembly with configured end fittings
LCP-000051
Custom 304 Stainless CDU Flanged Pipe Assemblies — AODSON Reference
An actual photographed group of formed 304 stainless CDU pipework examples with bends, welded interfaces and flanges. Tube size, route, pressure duty…
- Listed material
- 304 stainless steel tubing with machined flange components
- Assembly type
- Drawing-defined CDU liquid-cooling pipe and loop assembly
LCP-000039
EPDM Cooling Hose Assembly with Swaged Threaded Ends — MFC Reference
A separate photographed black rubber hose assembly with metal swaged, male-thread-looking ends. The manufacturer liquid-cooling sheet documents peroxide-cured EPDM and ordering color…
- Hose material
- Peroxide-cured EPDM rubber hose assembly
- Color options
- Multiple hose color options for different applications
LCP-000043
EPDM Sanitary-Clamp Hose Assembly — 202AA / V-ZEN Reference
A photographed group of complete black EPDM hose pieces with metal clamp-style ends and visible 202 EVOLUTION hose marking. The 202AA hose-stock…
- Listed hose stock working pressure
- 10 bar
- Hose construction
- EPDM inner and outer layers with textile-cord reinforcement and embedded steel helix
LCP-000075
Flanged Braided Metal Hose Assembly — AODSON Reference
A pictured corrugated stainless flexible hose assembly with external wire braid and welded flange ends. Select its active length, material and flange…
- Material options
- 304, 304L, 316 or 316L stainless hose material options subject to service review
- Assembly construction
- Corrugated stainless steel inner hose, external wire braid, and welded flange ends
LCP-000052
Formable Corrugated Metal Hose — FITOK HMF Series Reference
A complete pictured all-metal HMF hose that can be bent into a static route and retain its shape. The maker lists 316L…
- Listed materials
- 316L stainless corrugated hose; 316 or 316L stainless end connections
- Nominal hose size
- 1/4 in. to 1/2 in. nominal hose sizes
LCP-000035
Formed Stainless Y-Tube Assembly — MFC Reference
A photographed three-ended stainless formed tube assembly with a branch and multiple controlled bends. The manufacturer's liquid-cooling sheet documents CNC forming and…
- Material
- Stainless steel
- Forming options
- CNC-bent one-piece tubing; custom Y assemblies and manifolds
LCP-000072
Formed System-Pipe Module with Flexible Branches — Deya Reference
A standalone custom pipe module photograph shows a large return bend, two flexible branches and a mounting feature. The manufacturer's stainless system-pipe…
- System pipe construction
- Custom stainless system-pipe assemblies can use tube forming, joining and surface treatment for project-specific…
- Custom order basis
- The manufacturer offers drawing-based stainless system-pipe production and assembly
IMAGE NEEDEDProduct photograph
Component overview
Formed Tube Assemblies
A candidate family page for controlled tube geometry, ends, cleanliness, and testing.
- Material
- advanced polyethylene; low-density polyethylene; FEP; PTFE
- Material
- Advanced polyethylene
IMAGE NEEDEDProduct photograph
Component overview
Liquid Cooling Hose Assemblies
A candidate family page for configured hose, end connections, routing, and assembly validation.
- Material
- Zinc-free peroxide-cured EPDM is used in Data Master and MegaFlex family descriptions.
- Inside diameter
- Data Master: 7/32 to 1 in; Eco: 3/16, 1/4, 3/8 in; MegaFlex: up to…
LCP-000023
Manifold-to-Server Liquid Cooling Hose Kit — Motivair Reference
A complete photographed hose kit with different end connectors for a direct-to-chip loop, documented as a configurable Motivair product rather than an…
- Documented loop connections
- In-rack manifold to server; in-rack manifold to CDU or HDU
- Listed diameter options
- 3/16, 1/2, 3/4, 1 and 2 inches
LCP-000080
Peroxide-Cured EPDM Liquid Cooling Hose Stock — CEJN Reference
A full-coil manufacturer photograph of un-terminated EPDM coolant hose for cut-to-length assembly. The official datasheet lists 10 bar hose working pressure and…
- Maximum working pressure
- 10 bar (150 psi)
- Temperature range
- -40 to +100 °C
LCP-000122
Rack Manifold Hose Connection Kit — nVent HOFFMAN RCH12001 Reference
A short RackChiller hose connection kit documented as RCH12001, with 12 in (305 mm) hose length and NSP06 barbed socket connection at…
- Hose length
- 12 in (305 mm)
- End connections
- NSP06 barbed socket at both connector sides
Specify with confidence
The details that shape your selection.
Prepare the route, length or bend drawing, both end connections and assembly acceptance requirements.
- Function and loop position
- Interfaces, drawing revisions and envelope
- Coolant, materials and seals
- Temperature, pressure and flow conditions
- Testing and documentation
- Quantities and delivery requirements
System and selection context
Hose and formed tube assemblies carry coolant between defined equipment interfaces. Routing, movement and connection loads determine which construction can be evaluated.
Inputs for review
Provide a route drawing, end connections, fluid conditions and quantity. Ask for finished assembly dimensions, cleanliness and test criteria instead of relying on the tube or hose-body catalog alone.
Information to prepare
- Prepare the route, length or bend drawing, both end connections and assembly acceptance requirements.
Configuration and quotation
Include the drawing or specification revision and identify any requirements that are still to be confirmed. Available configurations, testing and documentation are confirmed with quotation.
Documented reference configurations & supporting imagery
Local editorial preview
Related component references
Manufacturer examples retain their model and conditions. These references describe source products, not approved stock or supply. Images are pending final selection and rights review.
Hose Assemblies
68 documented parameter entries. Open the family to review model scope, options and conditions.
Tube Assemblies
17 documented parameter entries. Open the family to review model scope, options and conditions.
Selection resources
Know what to ask.
Selection guide
How to Prepare a QD or UQD Selection Enquiry
Define interface, service method, fluid conditions, materials, validation, and quantity before comparing coupling options.
Read guideSelection guide
Hand-Mate vs Blind-Mate Liquid Connections
Separate the service architecture from the exact connector interface before preparing an RFQ.
Read guide
Selection guide
Hose and Tube Assembly RFQ Checklist
A practical checklist for routed liquid-cooling assemblies.
Read guide