Application & industry
Measurement and detection requirements used to support a defined protection strategy.
Component selection
26 local draft records. Includes unfinished records and Family overviews. Draft · Noindex. Reference configurations are not approved stock. Image public-use review remains separate.
Show content-ready draftsLCP-000028
A separately pictured FW-series welded inline filter with opposed male-thread ends; manufacturer evidence distinguishes its fixed element, back-flush boundary and ordering choices…
LCP-000087
A compact woven-wire last-chance screen retained by its locking end in a metal housing. The photographed BR range lists 11.93 mm body…
LCP-000092
A conductive, braided leak-sensing cable documented for liquid-cooling equipment. The manufacturer identifies the MA1YHZ0102(1.0) reference and an operating temperature range of -40…
LCP-000027
A single pictured FI-series inline filter with straight-through tube-fitting geometry; the catalog documents separate body, element and filter-area choices rather than one…
LCP-000089
A woven-wire screen cartridge for a flat-bottom hole with a separate retention feature. The 10 mm reference lists 9.93 mm body diameter…
LCP-000094
A compact spot sensor combining optical and electrode detection, with RS485/MODBUS-RTU output. The documented XW-DC-01A uses a DC 9–30 V supply and…
LCP-000090
A very small plastic-housing press-in screen for finer 4–40 µm selection, distinct in filtration range and cavity scale from the standard 8…
LCP-000104
A separate three-screen monitor for up to four compatible flow-sensor channels. The original product photo shows the display unit alone; fluid-contacting sensors…
LCP-000093
A coiled, connector-terminated leak-sensing line for use with a compatible locating controller. The documented XW-ES2-10H1 cable is 6.0 mm in diameter and…
LCP-000068
A larger cylindrical bypass filter for higher-flow liquid-line layouts, with a clear standalone official product image. The FH catalogue distinguishes 4H and…
LCP-000012
An identifiable in-line FJP sensor with a single body for three measured variables; the manufacturer's size-specific flow rows, threads and output choices…
LCP-000064
An official 800 × 532 product photograph clearly identifies PF3W720-04-A, with a built-in display and two threaded fluid ports. The corresponding maker's…
Component overview
A candidate family page for particle-control and service requirements.
LCP-000096
A DIN-rail-style controller for a compatible locating sensing cable, with RS485 and relay outputs. The XW-PC-3 reference lists a monitored run up…
LCP-000034
A separately pictured DST P140 pressure-transmitter series reference for liquid-cooling data centers, with MEMS and sealed stainless media-interface construction. Range, signal, connector…
LCP-000091
A locking-end woven-wire insert for direct installation in a metal housing, distinct from the plastic press-in and customer-retained cartridges. The 10 mm…
LCP-000121
A complete modular water-sensing cable with factory-installed plastic connectors. The Raychem TT1000 series is documented for data-center subfloors and pipe-adjacent leak detection…
LCP-000005
A separately housed leak-detection panel that monitors sensing-cable circuits and provides alarm outputs; the pictured device is an exact model reference, not…
LCP-000095
A stand-alone optical point leak sensor with one configurable dry-contact output. The documented XW-DC-01B uses DC 9–30 V and a normally open…
LCP-000088
A woven-wire screen pressed directly into a plastic housing or fitting. The pictured 8 mm family lists a 7.92 mm body diameter…
LCP-000069
A removable pleated metal-mesh element for an FH high-capacity filter housing. Its independent catalogue photograph shows the entire cylindrical component; pore grade…
LCP-000078
An exact pictured quick-change filter configuration with SUS304 housing, Rc3/4 ports, NBR housing seal and a nominal 0.5 µm cotton-fiber element. The…
LCP-000103
An inline remote flow-sensing unit with its own cable connection but no integrated numeric display. The original unit label identifies 0.5–4 L/min,…
LCP-000004
A tee-body fluid filter with a serviceable element chamber, documented sintered and mesh element choices, and a nominal pore rating that must…
Specify with confidence
Identify the measurement/detection locations, output interfaces, mounting and buyer-defined alarm requirements.
Flow, pressure and temperature measurement and leak detection serve different observability questions. Locations and outputs should be set by the buyer-owned control strategy.
Map sensor and detection points, expected ranges, process and electrical interfaces, alarm boundaries, calibration and verification method.
Include the drawing or specification revision and identify any requirements that are still to be confirmed. Available configurations, testing and documentation are confirmed with quotation.
Local editorial preview
Manufacturer examples retain their model and conditions. These references describe source products, not approved stock or supply. Images are pending final selection and rights review.
63 documented parameter entries. Open the family to review model scope, options and conditions.
43 documented parameter entries. Open the family to review model scope, options and conditions.
76 documented parameter entries. Open the family to review model scope, options and conditions.
Selection resources
Selection guide
Define interface, service method, fluid conditions, materials, validation, and quantity before comparing coupling options.
Read guideSelection guide
Separate the service architecture from the exact connector interface before preparing an RFQ.
Read guide
Selection guide
A practical checklist for routed liquid-cooling assemblies.
Read guide